Monday, April 2, 2012

Parts Needed to Make Your Own Home Solar Panel

Many habitancy think that it is impossible to make their own solar panel at home. The truth is that it is not that difficult to do. You can even produce them for under 0!

Here is a list of parts need to make your own home solar panel and produce enough electricity to power your own house hold loads.

Inverter Solar Panels

1. Energy Source- Solar Panels (12 V is fine)
2. Charge Controller
3. Battery
4. Inverter

Parts Needed to Make Your Own Home Solar Panel

This type of law is used to run household loads directly off the inverter.
Here is a description of the parts needed:

Pv panels

Otherwise known as solar panels they are a solar-electric system's defining component. Pv panels capture the sunlight and generate direct current (Dc) electricity.

Pv panels are rated in watts based on the maximum power then can produce when performing under ideal sun and climatic characteristic conditions. You will need to use the rated yield of your Pv panels to determine how many panels you will need to meet your electrical needs. You can then consolidate the Pv panels in a series, which is called an array.

Charge Controller

A fee controller will drastically increase the life of your battery. This unit will protect the batter from being overcharged. When the battery bank is fully charged, the fee controller will interrupt the charging process. Some fee controllers also stop the battery from discharging at night time.

Deep Cycle Battery

This is the type of battery you should use in your system. This is what will store all of the vigor produced by your Pv panels. A great source of free deep cycle batteries from is old golf carts of forklifts.

Inverter

The inverter is what turns the direct current (Dc) into alternating current (Ac). Ac is what most of your household appliances use.

Using these four easy parts you can make enough electricity to run your household appliances off of and rid yourself of that annoying electric bill.

Parts Needed to Make Your Own Home Solar Panel

Rv Tip: Troubleshooting a 12-volt Dc problem

If you enjoy Rvs you already know that a major part of the fun with Rving is getting away from everything. You can just pack up the Rv and head out to get some well deserved rest and relaxation without having to deal with the hassles of day-to-day living. These restful, relaxing, memory production Rv trips should not be jeopardized by something as uncomplicated as a 12-volt electrical qoute ruining your vacation.

If you've been Rving for any amount of time you are already aware that a good quantum of the devices and accessories in your Rv operate off of 12-volt Dc power. 12-volt Dc or Direct Current is electricity supplied by the Rv batteries. Dc electricity flows in one direction, from negative to positive. 12-Vdc electricity is stored in the Rv batteries and supplies power for components, devices and appliances that operate off of 12-volts.

Inverter Solar Panels

These 12-volt devices comprise overhead lights, the water pump, vent fans, furnace fan, range hood fan, Lp gas leak detectors, stereos, 12-volt Tvs and the refrigerator when it's operating in the Lp gas mode. When you go camping you rely on these 12-volt items to operate properly, especially if you're dry camping without hook-ups. So what do you do when one of these 12-volt items quit working?

Rv Tip: Troubleshooting a 12-volt Dc problem

For the sake of an example let's say that we are dry camping and our 12-volt water pump quits working.

I am convinced that just about any person is capable of troubleshooting a 12-Vdc problem, and in many cases repairing the qoute without it ruining your camping trip. For starters you will need a couple of uncomplicated tools to support you in troubleshooting your Rv's 12-volt electrical system.

1). An inexpensive 12-volt test light.

2). A multi-meter that can test for Dc power.

Both of these are available at local auto parts stores. You should also keep some electrical tape, discrete size wire nuts, 12-volt light bulbs and 12-volt fuses on hand. Check the amperage of the fuses used in the power distribution box and keep an assortment. If you're aware of any inline fuses used on any of the 12-volt devices keep these on hand too.

Now, try to settle the last time the water pump unquestionably worked. Did you leave the Rv for a period of time with the pump on? Is there water in the fresh water retention tank? Were you working on or around something else that could have affected the doing of the water pump? Try to think of all inherent scenarios. Something might jar your memory resulting in a quick fix to the problem.

If not, the first step is to verify that the coach battery or batteries are charged adequate to provide power to these 12-volt items. There are a couple of ways to perform a quick test on the coach batteries. You can use the monitor panel to check the condition of the coach batteries. To get an literal, reading make sure the Rv is not plugged into electricity and turn on a couple of overhead lights to place a small load on the battery. Check the reading at the monitor panel. (If you check the reading at the monitor panel when the Rv is plugged in to electricity it will give you fully charged reading) A more literal, recipe is to test the battery with a multi-meter. Set the meter to read 12-Vdc and place the negative test probe on the negative battery concluding and the determined test probe on the determined battery terminal. A fully charged battery will read in the range of 12.6 to 12.7 volts. If it reads less than 12-volts it is below a 50% state of payment and will need to be charged.

If the battery is fully charged, the next step is to make sure that any battery disconnect switch for the coach battery is turned on. If the battery disconnect switch is on, verify that other 12-volt devices in the Rv are operating properly. If there is 12-volt power to the interior of the Rv you need to check the fuse for the water pump in the power distribution center. settle which fuse is for the water pump (fuses are commonly labeled) and find a suitable ground for the 12-volt test light. Test both sides of the fuse for 12-volt power. If the test light only lights on one side of the fuse replace it with the permissible size fuse and try the water pump again. If there was power at both sides of the fuse check for 12-volts at the water pump switch. If there is voltage, and the switch is operating properly check the water pump wiring for an inline fuse.

Find a good ground for the 12-volt test light and probe the wire on both sides of the fuse. If there is only power on one side of the fuse replace it with the permissible size fuse and test the pump again. If there is power on both sides of the fuse check the water pump wiring connections at the wire nuts. It's inherent for connections to come loose due to inordinate vibration. literal, any loose connections and try the pump again. If the pump still doesn't work feel the motor to see if it is hot to the touch. If the motor is hot, a thermal breaker may have been triggered. Allow the pump time to cool off and see if it re-sets itself.

If you unblemished all of these tests and there is 12-volt Dc power coming to the water pump motor, and it still doesn't come on, chances are the water pump is bad and it will need to be replaced.

Troubleshooting a 12-volt electrical qoute in your Rv is not that difficult. Follow the logical path of the gadget you are troubleshooting and see if you can settle where the qoute is. It might be inherent for you to save your well deserved vacation, some money and a trip to the Rv dealership too.

Note: If you don't feel comfortable performing your own maintenance or troubleshooting the 12-volt electrical system, take your Rv to a reputable mend town to have it checked out and repaired

Happy Camping!

Copyright 2006 by Mark J. Polk owner of Rv study 101

Rv Tip: Troubleshooting a 12-volt Dc problem